來源:http://m.gbpeixun.com/ 發布時間:2018-04-25
1、構造新穎
1. The new structure is novel
2、自重輕耐久性此種鋁板質輕,每平方米質量約7kg左右,其抗拉強度達200N/mm2;鋁板延伸度高,相對延伸率高于10%,能承受高度彎曲而不破裂,韌性良好。
2. The weight of self weight and light durability is light, the quality of each square meter is about 7kg, its tensile strength is 200N / mm2; the elongation of the aluminum plate is high and the relative elongation is higher than 10%. It can withstand high bending without rupture and good toughness.
3、裝飾性強區別于國內外其它保溫板的構造,直接將低導熱率、高保溫性能的硬質聚氨酯經灌注發泡牢固粘結在成型鋁板背面上。
3, the decoration is strongly different from other thermal insulation boards at home and abroad, and the hard polyurethane with low thermal conductivity and high thermal insulation property is firmly bonded on the back of the molded aluminum plate.
4、涂層耐候性強鋁板表面噴涂的是含KYNAR-500達70%的氟碳聚合物樹脂,經過這種氟碳噴涂的鋁板表面,抗酸雨、抗腐蝕、抗紫外線能力極強,可保證涂層20年以上不褪色、不粉化、不脫落。
4, the coating of weatherproof strong aluminum plate is coated with fluorocarbon polymer containing KYNAR-500 up to 70%. Through this fluorocarbon spraying aluminum surface, the ability of anti acid rain, corrosion resistance and ultraviolet resistance is very strong. It can ensure that the coating is not fading, powderizing and shedding for more than 20 years.
5、安裝快捷工藝合理保溫鋁板在工廠流水線上制成,到工地直接干掛在圍護結構上,是一種新型節能裝飾一體化的外裝材料,且施工方便,工期短。總之聚氨酯硬泡雖然能用明火點燃,但不易燃燒。即使燃燒起來也僅僅是表面焦化而不會被燒毀。
5. The installation of reasonable heat insulation aluminum plate on the factory line, directly hanging to the construction site on the construction site, is a new type of energy-saving decoration integrated high-grade external material, and the construction is convenient and the time limit is short. In conclusion, polyurethane rigid foam can be ignited by open flame, but it is not easy to burn. Even if it burns, it is only surface coking instead of being burned.
6、節約資源建筑外墻傳統做法需大量使用水泥、砂子、水及其它材料,資源十分浪費,拆除后垃圾很多。
6, the traditional way of saving resources and building exterior walls needs a lot of cement, sand, water and other materials. The resources are very wasteful, and there is a lot of rubbish after demolition.